PRODUCTS

The pump is simple and robust, easy to handle and maintain. It uses water or hydraulic oil as the working medium, and other liquids can be used as needed.

The basic parts of the pump are a high and low pressure cylinder, a non-return valve, a filter, a manometer and a high-pressure pipe.

The high pressure piston is located concentrically in the low pressure piston, and turning the gearbox by 90 ° enables simultaneous operation of both pistons up to a pressure of approximately 190 bar with a capacity of 0.113 l / stroke, ie operation of a high pressure piston up to 350 bar with a capacity of 0.030 l / stroke The suction of the working medium is done from the tank via a ball valve, filter and non-return valve.

The pressure side of the pump is equipped with a non-return valve, a manometer with an operating range of up to 600 bar, a manometer valve and a flexible high-pressure pipe 3 meters long. The connection on the pressure side is 1/2 “NPT male.